Emax GT2826/05 860KV Brushless Motor

This small motor from Emax is ideal for models from 800-3000 grams (28–6.6lbs).   This is motor is comparable to the Power 25 motor from E-flight. The motor includes 3.0 mm bullet connectors as well as a complete hardware package.  The precision bearings and rare earth magnets guarantee an excellent
performing motor.  The complete hardware packages enables and kind of mounting you need!

With the E-MAX medium class motor, you can get more than 2000g of static thrust by rotating a 13 inch class propeller with a lipo 3 cell. In addition, it is recommended for aircraft that emphasize speed because it rotates a 9-inch class propeller at around 13,000 rpm with 5 cells. Recommended for fuselages with 30 to 50 class engines.
A 4mm type gold connector is already installed assuming a large current.
The shaft is a durable 5mm diameter type with a large notch at the tip of the shaft to prevent the collet from slipping. When using with back mount, attach a dedicated propeller mount. Compared to a collet, the propeller is easier to attach, and you don’t have to worry about idling or getting stuck tightly.
Please note that it is not possible to change the mount type by pushing the shaft to the opposite side or replacing it.

Specs:

Number of lipocells: 3 to 4 cells
*Previously, it was described as compatible with 3 to 5 cells, but it should be compatible with 3 to 4 cells
KV value: 860 rpm/V
Maximum A: 47A
Size: Diameter 35mm , length 49.5mm (length including shaft 68.3mm) Shaft
diameter: 5.0mm
Weight: 170g (motor body only)

Accessories:

Cross mount, screw
collet, propeller mount, 4mm gold connector

Test data (When using APC-E propeller, Jack Power XQ 11.1V 2200mA 35C, XQ 14.8V 3800mA 35C